How Digital Imaging Improves Dental Diagnosis
When a patient asks what an X-ray shows, you want to spend the visit explaining their care in a way that’s easy for them to understand. Digital dental imaging can help you bring useful images into that conversation. The benefit comes from choosing the right type of image, capturing it well, and keeping it easy to find in the patient record. Here’s how to make those steps work together to support diagnosis and help patients understand their care.
Review digital X-rays during the appointment
You should be checking x-rays during the appointment while your patient is still in the chair. This helps you spot a missing area or a problem with the view before the visit moves on. When images are stored in the patient’s record, you can also find earlier views for comparison.
Image quality starts before the software
A digital image is not automatically a better image. Sensor placement, patient position, exposure settings, and the area shown all affect what you can see. Overlapping teeth or missing anatomy can make an image hard to interpret, even if it looks sharp.
Zoom and contrast controls can make captured details easier to see. They cannot show anatomy outside the image or restore detail lost through movement. Keep the original image available, and assess what it shows alongside the clinical exam.
Before using an image, check the following:
- It belongs to the correct patient and has the right date, region, and orientation
- It shows the area you need to assess
- The exposure and positioning allow a clear view, with no movement or overlap that prevents assessment
- You can review it at a suitable size on a screen designed for clinical use
Reduce exposure with the right imaging technique
Digital X-rays can expose patients to less radiation than film X-rays when the equipment and settings are right. The American Dental Association (ADA) recommends digital sensors or plates as one way to reduce exposure. The dose still varies from one exam to another. Taking an image again adds to that dose.
Choose X-rays based on the patient’s needs and the information you already have. The ADA and the American Academy of Oral and Maxillofacial Radiology updated their patient-selection recommendations in 2026. They emphasize the clinical exam and each patient’s needs. There is no single X-ray schedule that suits everyone.
Review suitable earlier images before taking new ones. Use the right exposure settings and limit the beam to the area being examined. If an image is not usable, find out why before taking another. Repeating the same setup may produce the same problem.
Choose the imaging method for the question
An optical scan creates a 3D model of visible surfaces. Cone-beam computed tomography, or CBCT, uses X-rays to show structures inside a 3D volume. These records serve different purposes and cannot replace each other.
| Method | What it can contribute | Limits to consider |
|---|---|---|
| 2D digital radiography | Shows teeth and supporting structures to help assess decay between teeth or changes around a root tip | A flat image may hide structures that overlap. The angle and image quality affect what you can assess. |
| Optical intraoral scanning | A surface model of teeth, gums, and the bite for assessment and treatment planning | Does not show roots or bone below the surface. It cannot replace X-rays that are needed. |
| CBCT | A 3D view for selected cases, such as implant planning or complex root canal assessment | Uses ionizing radiation, usually at a higher dose than conventional dental X-rays. Use only when needed. |
| Intraoral photography | Photos of visible surfaces can help explain and record a finding | Shows only what the camera can see, not hidden structures |
Use surface scans to assess tooth shape and the bite
An intraoral scanner is designed to record the shape of visible tooth and gum surfaces. When you capture the bite, it also records how the upper and lower teeth meet. The model can help with restorative or orthodontic planning and help you explain the position of the patient’s teeth.
A surface model may help you assess the space for a restoration. A radiograph may answer a separate question about the tooth or surrounding bone. Choose the records each decision needs. Before using a scan, check that it is complete and that the bite was captured correctly.
Some scanners have extra diagnostic features, but these vary by device. A basic surface scan does not show the same information as an X-ray. Do not assume it can detect decay hidden beneath a surface.
Use CBCT only when it is needed
CBCT can show anatomy that can be challenging to assess on a 2D image. It may help in selected implant, root canal, or surgical cases. The extra information should help answer a question that affects care.
The U.S. Food and Drug Administration advises using CBCT only when other imaging methods cannot provide the information needed. Choose the area scanned and exposure settings for that patient and question. Make sure a qualified clinician reviews the scan.
Our Dentrix Ascend 3D CBCT imaging lesson helps explain how to use the software. The ability to display a scan does not, by itself, mean a patient needs one.
Review findings while the patient can ask questions
When you can view images with the patient in the chair, you can explain what you’re seeing alongside the exam findings. Show the patient the area you are discussing. Be clear about what you know and what needs more assessment before you can make a diagnosis.
Name the tooth being discussed and explain what the image shows. Say what other information you need before making a decision. A colored overlay or dark area alone is often not enough to show that treatment is needed.
Check image differences before drawing conclusions
When comparing old and new images, check how each was taken. A different angle, exposure, or level of zoom can change how a feature looks. Image processing can change its appearance, too. Check those differences before describing a change as worsening disease.
Use the image to explain treatment options, benefits, and risks. Ask what the patient would like you to explain again. A clear image can help the discussion, but the patient still needs enough information to decide about treatment.
Keep images connected to the patient record
Store images where the people providing care can find them. Separate folders, unclear labels, and manual transfers make that harder. Linking images to the patient record lets you review them while documenting the visit.
In Dentrix, the Patient Chart’s imaging tools let you take and review patient images. Ascend by Dentrix Imaging saves captured or imported images to the selected patient’s record. The steps differ between the two products, so check the setup for the one you use.
Learn more about our Dentrix imaging and clinical tools and Ascend by Dentrix clinical workflow.
Test how images reach the patient record
Before changing your imaging setup, test the full process with a typical case:
- Select the correct patient before taking or importing an image
- Capture or import a supported image. Check its date, orientation, and tooth or region labels
- Open it from the patient record where the clinician will review it
- Record the findings and the clinician’s interpretation in the chart
- For a referral, check that the authorized recipient can receive and open the image or 3D scan
Check support for your sensors, scanners, file types, drivers, and software versions. Taking an image directly, importing a file, and opening another program through a software link are different options. Support for one does not mean every device or file will work.
Check who can access images, how they are backed up, and how to export them. A thumbnail or PDF may help explain a finding. Keep the original image or 3D scan when it is needed for the patient’s record.
Our Ascend imaging modality overview shows how images are grouped for review. When setting up or moving an imaging system, check the current software and device instructions.
Build a sound imaging workflow before adding AI
Artificial intelligence (AI) tools depend on the images they receive. Poor positioning or a missing area can still limit the result. Quality checks look for problems with the image itself. Enhancement tools change how details appear on the screen. Diagnostic tools flag possible findings for the clinician to review.
Our Clinical Technology Suite includes tools for different tasks. Image Verify checks image quality. Detect AI helps clinicians review X-rays. Magnify creates enhanced close-ups of flagged areas. Check which tools are available for your product and setup.
The clinician must still review the full image with the exam findings and patient history. Check which image types, findings, and patient groups the AI tool supports. Review any flagged area carefully. An area with no flag may still need attention.
Our guide to AI-assisted diagnosis in dentistry explains these tools in more detail. The foundation remains the same: take an image only when needed, check its quality, and keep it in a record the clinician can find and review.
Frequently asked questions
What is digital dental imaging?
Digital imaging stores dental pictures on a computer. The pictures may be X-rays, surface scans, photos, or 3D CBCT scans. They show different information. X-rays use ionizing radiation. A standard optical surface scan uses light to record visible surfaces instead.
Is digital radiography safer than film X-rays?
It can use less radiation than film when the equipment and settings are appropriate. Taking X-rays only when needed, choosing the right exposure, and avoiding unnecessary repeats also help reduce risk. CBCT usually uses more radiation than conventional dental X-rays. A digital image does not always mean a lower dose.
How does intraoral scanning help with diagnosis?
An optical scan creates a surface model of the teeth, gums, and bite. This can help with assessment and treatment planning. It does not show the inside of a tooth or the bone beneath the gums. Use it alongside the clinical exam and any needed X-rays.
Does digital imaging work with AI diagnostic tools?
Yes. Compatible AI tools can flag possible findings on supported digital images. Check which images and patient groups the tool is designed for. The clinician still reviews the image with the exam and patient history and makes the diagnosis.